This drill fixture works for two models, the 575S and the 575A. This fixture has four mounting screw holes, two holes marked "S". Once the screw holes have been drilled into the stock for mounting the butt plate, the same holes can be used to hold the fixture, as well as provide the correct position for drilling. Unit comes complete with steel plate, 1 1/8" multi-spur bit and drill bushing.
This drill fixture works for the GraCoil® S and LP models, the only difference is the hole depth. Once the stock has been cut off and the mounting screw holes have been drilled, then the drill plate can be mounted. Now you are ready to drill the 1 1/8" diameter hole to required depth and then drill the 3/8" hole in two places to their required depth. Remove the fixture, fit the plate and you are done. Unit comes complete with steel plate, 1 1/8" multi-spur bit, 3/8" drill bit and drill bushing.
This drill fixture works the same as the DF15 drill fixture, the only difference being the location of the holes. A rifle stock is smaller than a shotgun stock so this requires a different hole pattern. Unit comes complete with steel plate, 1 1/8" multi-spur bit, 3/8" drill bit and drill bushing.